Unknown scanner hardware error.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The scanner can't find the filter of
the scanner.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The driver fails to request an error
code from scanner.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The scanner receives illegal set
tings.
(Modify scan mode settings, re
start the scanner and redo scan
ning. If this error happen again,
please contact your local dealer.)

The driver has received an unkno
wn scanner error message.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

Driver fail to communicate with
scanner.
(Check cable connection, SCSI ID.
Restart the scanner and redo sca
nning. If this error happen again,
please contact your local dealer.)

The scanner's 8253 chip is out of
order.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The scanner's SCSI controller is
out of order.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)


The scanner CPU is out of order.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)


The scanner RAM is out of order.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The scanner ROM is out of order.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The scanner fails to do calibration.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The lamp of scanner is too light.
(Restart the scanner and redo
scanning. If this error happen
again, please  refer to Scanner
Operational Manual to change
a new lamp.)

The motor or home position sensor
of the scanner is out of order.
(Restart the scanner and redo
scanning. If this error happen
again, please contact your local
dealer.)

The lamp of scanner is off.
(Restart the scanner and redo
scanning. If this error happen
again, please  refer to Scanner
Operational Manual to change
a new lamp.)


The lamp of scanner is too dark.
(Restart the scanner and redo
scanning. If this error happen
again, please  refer to Scanner
Operational Manual to change
a new lamp.)